
What Is the ProxBox TruckBox Gateway?
The Recon Dynamics ProxBox TruckBox is a vehicle-mounted wireless gateway for asset management. It receives information from compatible asset tags and uses cellular connectivity and GPS to provide remote visibility into equipment associated with a vehicle. The source describes monitoring of missing or relocated tools, inventory status, vehicle movement and certain aerial-work equipment indicators.
How Does the TruckBox Connect Assets to the Cloud?
The listed communications components include SiRF Star IV GPS, 4G LTE cellular communication and an IEEE 802.15.4 local receiver. A vehicle-mounted gateway can provide a changing point of reference for tags carried in or near a truck, enabling last-observed asset association and movement-related reporting. Wireless range depends on installation, antenna selection and the physical environment.
Sensing and Reporting Capabilities
The datasheet lists an internal accelerometer, GPS location and direction, and a temperature specification of ±3% over operating range. It also identifies tool/equipment missing-or-relocated status and aerial harness lanyard clip-in and boom/lift status. The document does not fully explain the source of every status input or provide safety validation for aerial harness indications; avoid equating a reported status with verified compliance.
Electrical Requirements
Nominal input: 12 V DC.
Current: 0.3 A at 12 V DC.
Listed power: 4 W.
Voltage range: 8–18 V DC.
Power source: vehicle electrical system; no separate device battery is listed.
The device should be installed with appropriate fused wiring and mounting according to vehicle and equipment requirements.
Physical and Environmental Specifications
Dimensions without connectors: 9.2 × 7.4 × 2.8 inches (234 × 187 × 71 mm, as listed).
Weight: 2.5 lb (1.1 kg).
Enclosure rating: NEMA 4X and IP66.
Operating temperature: −40°F to +131°F (−40°C to +55°C).
Regulatory reference: FCC Part 15.
Uses in Construction Fleet Operations
A TruckBox-equipped vehicle can support automatic records of tagged tools entering or leaving a work area, improve equipment accountability and provide GPS context during fleet operations. Asset tracking is based on available sensor observations and gateway contact; the datasheet does not establish continuous GPS tracking of every tag separately.
Frequently Asked Questions
Does TruckBox require charging?
It is powered through the host vehicle rather than a separate battery.
What local radio does it use?
The listed receiver standard is IEEE 802.15.4.
Can it confirm that an aerial worker is safely tied off?
The sheet references lanyard clip-in status, but it does not demonstrate a certified fall-protection verification system.


