
What Is the ProxBox YardBox Gateway?
The Recon Dynamics ProxBox YardBox is a gateway for asset monitoring at fixed facilities, yards and other locations where tagged tools and equipment need to be associated with a stationary receiver. It is part of the same broader Recon asset-management architecture as the vehicle-mounted TruckBox and the PROXLET smart tag. The datasheet describes a system that connects local wireless asset observations with GPS and cellular reporting.
How Does YardBox Support Inventory Monitoring?
YardBox receives compatible local radio signals so managers can review when tools or equipment were last observed at a designated location. It is intended to support missing and relocated equipment reports and inventory status. The system can reduce reliance on manual scans, but presence or absence of a signal must be interpreted in light of RF coverage, tag condition and placement.
Radio, GPS and Cellular Capabilities
The document specifies SiRF Star IV GPS, 4G LTE cellular networking and an IEEE 802.15.4 receiver. The listed sensing capabilities include tool/equipment inventory status, GPS location and a temperature specification of ±3% over operating range. Some general ProxBox copy also refers to motion, aerial harness and boom/lift status; the YardBox-specific sensing-capabilities list does not detail all those functions. Confirm which are supported by the actual model and connected peripherals.
Power Specifications: Important Source Conflict
The YardBox datasheet describes the device as powered from a standard outlet, but its Power section prints “Input 0.3 Amps @ 12VDC 4 Watts” and “Voltage Range: 8–18 VDC.” A separate Starter Pack sheet describes a 110/120 V-powered Yard Box. These statements may reflect an external AC adapter or differing configurations. Do not connect mains voltage directly to a gateway based on these marketing summaries. Verify the supplied power accessory and current installation instructions.
Physical and Environmental Specifications
Dimensions without connectors: 9.2 × 7.4 × 2.8 inches (234 × 187 × 71 mm).
Weight: 2.5 lb (1.1 kg).
Environmental rating: NEMA 4X and IP66.
Operating temperature: −40°F to +131°F (−40°C to +55°C).
Listed compliance: FCC Part 15.
Typical Applications
YardBox can be used to monitor assets in equipment yards, tool rooms, maintenance facilities and fixed jobsite staging points. Multiple receivers can provide additional observation locations in a larger deployment, with coverage designed around actual structures and inventory flow. The datasheet does not provide a universal site capacity or guaranteed detection range.
Frequently Asked Questions
Is YardBox the same as TruckBox?
No. YardBox is presented as a fixed-location gateway while TruckBox is vehicle powered.
Does it need cellular service?
The source lists 4G LTE connectivity for backhaul.
Can it plug directly into a wall outlet?
The datasheet says it is standard-outlet powered but separately lists 12 V DC electrical input; confirm the proper power adapter before installation.


