
What Is the Recon Wireless Evacuation System?
The Recon Wireless Evacuation System is a relocatable wireless notification device intended to provide audible and visual alerts at construction sites and similar temporary environments. The datasheet describes a manual push-button alert, app-based trigger and reset functionality, a horn, a strobe and a selection of custom sounds. Its purpose is to extend the reach of site notification beyond a person's voice or a fixed wired device.
How Are Alerts Initiated and Presented?
The source lists manual push-button activation and app-based triggering and resetting. On activation, the unit can provide a high-output audible warning and a visible strobe. The horn is described as 125 dB, although the datasheet does not identify the test distance or acoustic measurement method. The system offers 50 custom sounds and alerts. These capabilities require a site-specific plan for alert meaning, device placement and staff response.
Wireless Radio Specifications
Radio band: 915 MHz ISM.
Receiver sensitivity: −120 dBm.
Transmitter output power: 20 dBm+.
Standard transmission/check-in interval: five minutes.
Intermittent receiver interval: three seconds.
A five-minute check-in is a communications status interval; it is not a promise of five-minute or instantaneous end-to-end alarm delivery in every condition. Deployment should be tested for the actual jobsite layout and operating state.
Physical and Environmental Specifications
Dimensions: 6 × 10 × 4 inches (153 × 254 × 102 mm).
Weight: 22 oz (624 g).
Environmental rating: IP65 or better, as claimed in the source.
Operating temperature: −40°F to +131°F.
The datasheet also prints −40°C to +60°C, which does not exactly correspond to the Fahrenheit upper limit. Confirm the manufacturer's current operating temperature limits before relying on the upper bound.
Battery, Installation and Remote Diagnostics
The system is described as fully wireless, with an eight-year or 96-month non-rechargeable lithium thionyl chloride battery. Its relocatable design is intended to simplify temporary-site setup as work areas change. Battery-level and remote signal-strength monitoring are listed as failure-forecasting functions, which may help administrators identify units that need attention before an event.
Construction Site Applications and Important Limitations
Potential applications include communicating jobsite evacuation instructions, drawing attention to urgent site events and supporting a coordinated emergency communications plan. A wireless device and horn do not by themselves make a complete emergency notification or life-safety system. Evaluate audibility, visibility, redundancy, training, coverage, power status, applicable codes and responsibilities with the project safety team.
Frequently Asked Questions
Can the system be activated manually?
Yes. A manual push button is included in the published feature list.
Does the system have a strobe?
Yes. The source describes a bright visual strobe in addition to its horn.
Does the datasheet establish code certification for evacuation use?
No specific listing or certification for a required fire-alarm or mass-notification installation is provided.


